Manufacturing and Supplying of Quality Water Treatment Plants.
A Safety Relief Valve is a type of pressure relief valve that is used to protect pressure vessels, storage tanks, pipelines, and other equipment from overpressure conditions. The valve automatically opens and releases excess pressure to maintain a safe operating pressure level and prevent damage to the equipment.
Safety relief valves typically have a spring-loaded mechanism that opens when the pressure inside the equipment exceeds a predetermined set pressure. The valve remains open until the pressure drops to a safe level, and then it automatically closes to prevent the escape of fluid or gas.
Safety relief valves are commonly used in a variety of industries, including oil and gas, petrochemical, chemical, and pharmaceuticals, where the storage and transportation of hazardous or flammable materials requires a high level of safety and protection against overpressure conditions.
It is important to choose the right type of safety relief valve for a specific application, as different valves are designed for different pressure ranges, flow rates, and materials of construction to meet specific safety requirements. Additionally, the installation location and orientation of the valve must be carefully considered to ensure optimal performance.
Size | 25mm, 40mm |
Maximum inlet pressure | 60psig (4 bar) |
Set Pressure | 0.5KG TO 40KG. |
M.O.C. | CS, CF8, CF8M, HASTELLOY, CS, PTFE ETC. |
Temperature | 426° C |
Widely Used For | Steam Boilers, Steam Services, Compressor, Receiver, Burners, Dryers and Other Piping System and Many |
Design | Self Actuating, Full Lift Spring Loaded |
Discharge | Angle |
Bonnet | Open Or Closed |
Pressure | 1 Kg/cm2 To 40 Kg/cm2 |
Material | ASTM A216 GR. WCB(CS), SS 316, SS 304, FORGED STEEL ASTM A105, SS 316TI, HASTELLOY C, PTFE, RUBBER, CAF, FEP, METALLIC SPIRAL WOUND GRAPHITE, and other as per customer requirement. |